Impulse heat sealer bags
Impulse heat sealer can be used with <a href="layflat-tubing.html#layflat-tubing-medium-duty-layflat-tubing-section">layflat tubing</a> and <a href="poly-bags.html#polybags-light-duty-polybags-section">polythene bags</a> to make bespoke packaging solutions.
Size specification: The first measurement gives the width of the impulse heat sealer. Impulse heat sealer forms a tight, secure seal on polythene and polypropylene film with no warm-up necessary. Adjustable timer controls to suit a wide variety of films from 2 x 25 microns (2 x 100 gauge) to 2 x 200 microns (2 x 800 gauge). The impulse heat sealer uses heated sealing wires that are triggered when the sealing bar is pressed close. The sealing bar is made of a silicone seal pad able to withstand direct heat contact. The sealing bar presses on the wire and film to melt and mend the material forming a seal. Electricity is used only when impulse heat sealer bar is down creating a 2mm seal.
| Sealing width | Cutter option | Price | Our reference | |
|---|---|---|---|---|
| 8" 203mm | No cutter | LF-NS-1_PBO LF-NS-2_PBO | ||
| 12" 300mm | No cutter | LF-NC-1_PBO LF-NC-2_PBO | ||
| 16" 400mm | No cutter | LF-GY-1_PBO LF-GY-2_PBO | ||
| 20" 500mm | No cutter | LF-GF-1_PBO LF-GF-2_PBO | ||
| 8" 203mm | Built in cutter | LF-KO-1_PBO LF-KO-2_PBO | Heat sealer with built in cutter. | |
| 12" 300mm | Built in cutter | LF-VA-1_PBO LF-VA-2_PBO | Heat sealer with built in cutter. | |
| 16" 400mm | Built in cutter | LF-QK-1_PBO LF-QK-2_PBO | Heat sealer with built in cutter. | |
| 20" 500mm | Built in cutter | LF-CO-1_PBO LF-CO-2_PBO | Heat sealer with built in cutter. |
Impulse heat sealer can be used with layflat tubing and polythene bags to make bespoke packaging solutions. Heat sealers with no cutter are ideal for sealing bags. Heat sealers with cutter are used for sealing layflat tubing rolls. Please choose width that is wider than the layflat tubing being sealed. Adjustable timer controls to suit a wide variety of films from 2 x 25 microns (2 x 100 gauge) to 2 x 200 microns (2 x 800 gauge). Electricity is used only when impulse heat sealer bar is down creating a 2mm seal.
